The Outlaw Series 4-Link Kit is a high quality kit designed to hold up to high horsepower.
Select your desired housing bracket style:
• Mild Steel - 3" axle tube hole size
• 4130 - 3-1/2" axle tube hole size
Kit includes:
4 - Pro Series 1/4" thick Mild Steel or 4130 Housing 4-link brackets 3” or 3.5” Axle Tube
4 - Pro Series 1/4" thick 4130 Chassis 4-Link brackets
4 - 1-3/8" .095 4130 pro 4-link bars 20” Long
4 - 3/4"-16 LH bungs
4 - 3/4"-16 RH bungs
8 - 4 Hole doubler plates for housing brackets
4 - 5 Hole doubler plates for chassis brackets
4 - 7 Hole doubler plates for chassis brackets
4 - 1/2" x 3/4"-16 4130 LH Heims
4 - LH 3/4" Jam Nuts
4 - 1/2" x 3/4"-16 4130 RH Heims
4 - RH 3/4" Jam Nuts
2 - 3/4" wide billet threaded shock mounts
2 - 3/4" wide billet threaded shock mounts
10 - Aircraft-grade ½” Bolts
10 - Aircraft-grade ½” Nylocks
4 - Aircraft-grade 3/8” Bolts
4 - Aircraft-grade 3/8” Nylocks
8 - Aircraft-grade 3/8 Flat Washers
This kit features NAS bolts with MilSpec nuts. Close tolerance holes for the 1/2" NAS bolts provide considerably less bolt movement than competitors systems. Features .750" hole spacing instead of the normal 1" spacing to allow for a closer range of adjustment.
During installation while mocking up and welding we recommend the use of grade 8 bolts with our 4-link jigs (available separately) to hold the brackets together in the correct position. After all the welding is complete we recommend reaming the holes and using our NAS 4-link bolt kit during final assembly for even less bolt movement. (Do not use a drill bit!)
