Mailing List




You are here: Home > CHASSIS > Fabricated Parts
Choose a sub category:
Race Wings Tow Hooks
Sort By:
Page of 4
Team Z Universal Travel Limiter Kit
Team Z Universal Travel Limiter Kit
Our Price: $69.00

Team Z universal front end travel limiter kit more info
Chromoly Threaded Weld in Bung
Chromoly Threaded Weld in Bung
Our Price: $19.00

Weld in bung for 4 link bars or lower control arms fits 1 3/8  .095 wall tube more info
Team Z Race Pack IQ3 Bezel
Team Z Race Pack IQ3 Bezel
Our Price: $25.00

Have a Race Pack IQ3 Dash?  We have the perfect mounting solution for you!  We here at Team Z have created this new bezel to allow for a more mounting options.  Made out of 1/8" steel CNC cut on our laser jet this is a perfect fit! more info
Team Z Gas Pedal Kit
Team Z Gas Pedal Kit
Our Price: $220.00

Looking to replace your flimsy old stock gas pedal?!  Team Z now offers a stock location replacement gas pedal.  It can be used on all 79-04 Mustangs and is a true performer! Our setup is designed to use both a stock cable or a Lokar style throttle cable.  Every piece of this kit is made in house and TIG welded for superior strength. All the brackets are cut on our own personal waterjet to ensure a precise fit every time!  Made proudly in Detroit! more info
Team Z Club Car Push Bar Kit
Team Z Club Car Push Bar Kit
Our Price: $370.00

Looking to add a pushbar to your golf cart for the track? We now offer a kit made specifically for the Club Cart brand golf cart.  Utilizing the front factory bumper mounts of the golf cart, we have made a bracket that installs in its place. This kit comes with a push bar and one quick pin for easy hook up and release of your drag car.  When not in use, just swing the push bar up and it will lock it in to the bumper bracket and ensure it wont fall out!  Our kits are made in shop and has an option to be coated with a heavy duty powdercoating to ensure to withstand the outdoors.  Proudly made in Detroit! more info
Team Z 8.8" Complete Brace Kit
Team Z 8.8" Complete Brace Kit
Our Price: $270.00

Our Complete Brace Kit come with both the Forward Brace kit and the Bottom Brace to ensure that you get the most support out of your 8.8" housing.  Both kits will limit twisting and bending that may occur with higher horsepower.  The front holes by the pinion must be drilled out to 7/16" to accommodate the hardware for the forward brace.

*PICTURES OF COMPLETE HOUSING DO NOT REPRESENT ACTUAL PARTS IN KIT, NO SHOCK MOUNTS ARE INCLUDED AND MUST BE PURCHASED SEPARATELY!
more info
Team Z Mustang 87-04 Bumper Support
Team Z Mustang 87-04 Bumper Support
Our Price: $183.00

Team Z Bumper Support Replacement Kit for your 1987-1993  and 1994-2004 Mustang. This is a direct bolt in that will replace your old heavy factory bumper support, and shed some front end weight! Constructed out of 1'' round tube steel and plates fitted for 87-93 and 94-04 mustangs for easy installment.  Come coated in a heavy duty powder coated finish. more info
Team Z Steering Wheel Extender (4", 5", 6")
Team Z Steering Wheel Extender (4", 5", 6")
Our Price: $62.00

Team Z Motorsports offers a steering wheel extender to move your steering wheel closer to the driver.  It is constructed out of 6061 Aluminum to ensure strength while keeping the weight down.  Our extenders will be offered in 4", 5", and 6" options, as well as natural finish or powder coated. more info
Team Z 1979-2004 Mustang Rear Upper Shock Cross Bar
Team Z 1979-2004 Mustang Rear Upper Shock Cross Bar
Our Price: $177.00

This bar allows you to hang coil over shocks in-board of your factory mounts with ease!  It slides up between your frame rails and gets welded in to place.  Constructed out of 1-5/8" x .083 Chromoly tubing and made in house in Michigan.  Comes with Bar, (2) 1/2 x 2-1/2" Bolts, (2) 1/2" Nylock Nuts, and (4) Shock Spacers. more info
Team Z  Solid Engine Motor Mounts - LS/LSX
Team Z Solid Engine Motor Mounts - LS/LSX
Our Price: $94.00

LS, LSX swap motor mounts. more info
Team Z Aluminum Mustang Dzus Rail Kit
Team Z Aluminum Mustang Dzus Rail Kit
Our Price: $85.00

Team Z Motorsports now offers aluminum dzus rail kits for your 79-93, 94-2004, and 2005-2014 Mustangs. Our kits are made from .065 aluminum, cut in house on our water jet to ensure quality, and come standard with mounting rivets.

We offer an additional kit to include all the neccessary springs and allen head or conventional style dzus fasteners. Make sure you select your year and choose to upgrade to the complete kit.
more info
Team Z Anti Roll Bar Tab Kit (Tabs / Hardware)
Team Z Anti Roll Bar Tab Kit (Tabs / Hardware)
Our Price: $26.00

Team Z Motorsports offers a anti roll bar tab kit to replace your old tabs, or for your new build.  The tabs are cut in house on our water jet out of 1/8" Mild Steel and have a 3/8" hole.  This kit also comes with grade 8 - 3/8" nuts and bolts to mount to the heims on your anti roll bar. more info
Team Z Anti Roll Bar End Cups
Team Z Anti Roll Bar End Cups
Our Price: $53.00

Team Z offers replacement weld in bearing cups for our Anti Roll Bars. Whether you are replacing your old ones or putting your existing roll bar in another car, we have got you covered.

Our kits have 1/8" Mild Steel plates and oil impregnated self lubricating bushings.

We offer these in two size, our 1" ID for those running one of our tail pipe anti roll bars, and our standard 1-1/4" ID for the Xtreme Duty, Universal, and Bolt In Anti-roll Bars. You must check what style you need in the drop down box to assure you get the proper set.
more info
Team Z Universal Wing Strut Kit - Natural
Team Z Universal Wing Strut Kit - Natural
Our Price: $209.00

Team Z Motorsports offers our own universal wing strut mount kit. This kit allows you to mount various wings to different vehicles with ease. It comes with all the mounting hardware and struts that you will need to make it possible. The struts, aluminum clevises, and mounting plates are all made here in our shop via CNC machining. Whether its for your 79-93 Mustang or your 68 Camaro, we have got you covered with our kits!

Kit Includes:
(4) Struts
(4) Quick pins 3/16x7/8
(4) Cotter Pins
(4) 10/32 RH Heims
(4) 10/32 LH Heims
(4) 10/32 RH Jam Nuts
(4) 10/32 LH Jam Nuts
(4) Triangle Stainless Steel Bumper Mounts
(4) T6 6061 Aluminum Clevis
(20) 10/32 x 1/2 Button Head Screws
(20) 10/32 Nylocks
(4) 10/32 x 3/4 Button Head Screws
more info
Team Z Weld On Filler Cap Kit
Team Z Weld On Filler Cap Kit
Our Price: $25.00

Team Z Motorsports offers a weld on filler cap for your fabrication needs. Whether you are building your own housing, or making a set of ballast bars, we have you covered. The filler neck and cap are made in house on our CNC Lathe to ensure a high standard of quality while being affordable. The filler necks are turned down from 8620 steel and the caps from 6061 Aluminum to provide high strength.
more info