|
|
|
|
|
|
GM single adjustable front shock: 1993-2002 Camaro & Firebird (Requires SPC300A spring)
|
|
|
Fits *93-02 Camaro/Firebird. All Strange single adjustable bolt-in shocks have 10 extension settings and a choice of various mounting options. Custom valving is available upon request.
*Requires Strange spring part# SPC300 or aftermarket.
|
|
|
|
|
|
|
|
|
|
Team Z F-Body Double Adjustable Double Heim Lower Control Arms
|
|
|
We now offer F-body fans a set of high performance lower control arms! Constructed out of 1-3/8" Chromoly steel, these lowers are sure to withstand some serious power! The double heim setup allows for maximum adjustments while being super simple to do! No taking the lowers out of the car to adjust! We use only the best heims to ensure the best quality possible for your race car. Everything is constructed, TIG welded, and assembled here in our shop. Comes standard with dark charcoal metallic powdercoat to resist corrosion. Proudly made in Detroit
|
|
|
|
|
|
|
|
|
|
Strange GM Double Adjustable Front Shock: 1993-2002 Camaro & Firebird (Requires SPC300A spring)
|
|
|
Strange front shock / Camaro / Double adj- ea
GM double adjustable front shock: 1993-2002 Camaro and Firebird
|
|
|
|
|
|
|
|
|
|
Team Z Anti-Roll Bar Universal - BILLET
|
|
|
The Team Z billet anti roll bar features billet steel arms and a 1 1/4” .250 wall main body, self-lubricating bronze bushing, and a high quality powder coated finish. The Team Z billet anti roll bar is available in Mustang specific or a universal fit version. Both are designed to eliminate body roll and increase traction and 60-foot times.
This Kit contains:
1- Billet Antiroll Bar (1-1/4" x .250 main body, with Billet Arms)
2- Ends with Bronze Bushings
2- 3/4 Diameter Tubes-16"
2- 3/8 LH Hiems, Weld-In Bungs, and Jam Nuts
2- 3/8 RH Hiems, Weld-In Bungs, and Jam Nuts
4- Weld On Housing Tabs
4- Weld On Tube Tabs
4- 3/8 Bolts
4- 3/8 Nylock Nuts
|
|
|
|
|
|
|
|
|
|
S60 GM F-Body housing
|
|
|
S60 fully welded GM F-Body bare housing with torque arm provision, choice of housing ends and F- Body mounts
|
|
|
|
|
|
|
|
|
|
GM brake kit for disc spindles: 1993-2002 Camaro, Firebird, & Trans Am
|
|
|
Strange front brake kits include Strange 4-piston billet directional calipers, forged slotted steel rotors,scalloped aluminum hubs with Timken bearings, seals, 1/2" screw in studs, soft pads, billet aluminum mounts and all necessary mounting hardware.
This kit fits the following GM vehicles with 4 3/4"bc. 93-02 Camaro & Firebird.
|
|
|
|
|
|
|
|
|
|
12 bolt F-Body housing with ends and F-Body mounts
|
|
|
12 bolt welded bolt-in bare housing for 82-02 F-Body with factory located mounts, torque arm provision and choice of housing ends.
|
|
|
|
|
|
|
|
|
|
GM brake kit for disc spindles: 1993-2002 Camaro, Firebird, & Trans Am
|
|
|
Strange front brake kits include Strange 4-piston billet directional calipers, forged slotted steel rotors,scalloped aluminum hubs with Timken bearings, seals, 1/2" screw in studs, soft pads, billet aluminum mounts and all necessary mounting hardware. This kit has 2 Piece Rotors.
This kit fits the following GM vehicles with 4 3/4"bc. 93-02 Camaro & Firebird.
|
|
|
|
|
|
|
|
|
|
Team Z F-Body Fab 9" Housing (4th Gen)
|
|
|
Team Z's new 4th Gen F-body Fab 9 inch Is a great alternative to the factory GM housing and most other competitors as well. It is superior in strength, and offers much more adjust-ability. We fabricate every piece in house and this is not a kit simply welded together. Our housings are available with standard options that others charge for, and is designed be high strength to handle high horsepower cars. The Axles Tubes are constructed out of 3" 4130 Tubing. From our 5/8" thick face plate to our 3/16" Lower control arm mounts, everything was designed to handle high horsepower!
This housing comes standard with a back brace, lower control arm brackets, spring perch cups, drain and fills, torque arm mount tabs, and late big ford ends (H1137).
You can upgrade from just our Fab 9" to include a set of double hiem double adjustable lowers, a heavy duty adjustable torque arm, and multiple pick up point torque arm cross member. Make sure you select that option to get everything you need!
****Our Housing and rear kit ship bare unless the powdercoating option is selected from the drop down menu****
|
|
|
|
