|
|
|
|
|
|
E-Gift Card
|
|
|
Team Z Motorsports Electronic Gift for Online Purchases!
*Gift card value amount is selected by customer.
|
|
|
|
|
|
|
|
|
|
Team Z Steering Wheel Center
|
|
|
Team Z offers steering wheel centers to be used with our Lightweight Steering Wheels and Strange Engineering Q1200NB Hubs.
Each center is anodized black with a white "Team Z" logo etched in the surface finish.
|
|
|
|
|
|
|
|
|
|
Team Z Steering Rack Bushing Kit - Offset / 4 Pack
|
|
|
These high performance polyurethane rack and pinion bushings from Energy Suspension replace your old worn out bushings while accommodating a lowered vehicle. These are just what you need to gain more positive control and feedback from your steering system. Made from quality hyper-flex polyurethane, they replace your stock, soft rubber bushings. This will keep your steering rack solidly mounted to your car, increasing steering response and providing you with more feedback. Handling will be much improved, and polyurethane won't deteriorate like rubber bushings do.
Fit 79-04 Mustang Racks/ Factory and Flaming River.
|
|
|
|
|
|
|
|
|
|
Team Z Weld On Filler Cap Kit
|
|
|
Team Z Motorsports offers a weld on filler cap for your fabrication needs. Whether you are building your own housing, or making a set of ballast bars, we have you covered. The filler neck and cap are made in house on our CNC Lathe to ensure a high standard of quality while being affordable. The filler necks are turned down from 8620 steel and the caps from 6061 Aluminum to provide high strength.
|
|
|
|
|
|
|
|
|
|
Team Z Flex Fit Hat
|
|
|
Team Z Motorsports now offers Flex Fit hats! Whether its at the track or out on the town, these hats let you rep the company you know and trust.
|
|
|
|
|
|
|
|
|
|
Team Z Poly A- Arm Bushing Kit / 8 Pack
|
|
|
Team Z Offers a replacement bushing kit for our A-arms and Street Beast Control Arms. Each set comes with (8) of our red high durability poly bushings.
|
|
|
|
|
|
|
|
|
|
Team Z Weld Together Steering Wheel Extender
|
|
|
Team Z now offers a weld together version of our steering wheel extender kit. Each kit comes with 2) 6061 Aluminum hub mounts and 1) 8" of 6061 Tube.
|
|
|
|
|
|
|
|
|
|
Team Z Tubular Front End / Motor Plate Tabs -79-04
|
|
|
Laser cut tabs to allow an motor plate to be used with the Team Z tubular front end kit. Made in the USA!
|
|
|
|
|
|
|
|
|
|
Weld Together LS Mounts for Team Z LS Mustang K-Member
|
|
|
Team Z now offers weld together LS motor mounts for our LS -K-member swap kits. Our kits allow you to put the engine in your own desired location to fit what engine combination you have. Our mounts are cut here in house on our CNC Waterjet out of 3/16" thick steel. Each kit comes with two bolt on engine mounts to mount on the side of the block, and 4 tabs to weld to the bolt on mounts in your desired location.
|
|
|
|
|
|
|
|
|
|
Bolt On Tie Down Kit
|
|
|
We offer Tie Down kits for k-members! Each kit comes with two tie down sets and 6 bolts and nuts to assemble them. Our kits will fit over 1-1/4" and 1-1/2" tubing as well as install in minutes. Custom Coating is available.
Made in Detroit
|
|
|
|
|
|
|
|
|
|
Team Z Steering Wheel Extender (4", 5", 6")
|
|
|
Team Z Motorsports offers a steering wheel extender to move your steering wheel closer to the driver. It is constructed out of 6061 Aluminum to ensure strength while keeping the weight down. Our extenders will be offered in 4", 5", and 6" options, as well as natural finish or powder coated.
|
|
|
|
|
|
|
|
|
|
Team Z 1979-2004 Mustang Seat Mount Base
|
|
|
Team Z Motorsports offers a bolt in Mustang seat mount kit for your 1979-2004 Ford Mustang. Our mounts bolt to the stock floor pans which makes the installation of a lightweight racing seat simple. These brackets are made in house at our facility out of .190" Aluminum to reduce weight while offering higher strength. Hardware is not included with base, stock hardware can be re-used.
We also have the Kirkey style side seat brackets in both standard and low profile heights that work in conjunction with these base mounts.
Due to varying build tolerances of the Mustang, some fab work may be necessary.
TEAM Z MOTORSPORTS INC. manufactured and/or distributed the enclosed components for use on vehicles designed and built by persons not associated or controlled by KIRKEY RACING FABRICATION INC. No specific use is recommended, intended or contemplated. Because some environments may subject components to severe stress, and because components are affected by many forces beyond the foreseeability and control of TEAM Z MOTORSPORTS INC., these products are sold WITHOUT WARRANTY EXPRESSED OF MERCHANTABILITY OR OF FITNESS FOR ANY PURPOSE. NO WARRANTY EXPRESSED OR IMPLIED ACCOMPANIES THESE PRODUCTS AND THE PURCHASER AND/OR USER, HAVING INSPECTED THESE COMPONENTS, MAKES THE SOLE DETERMINATION OF THEIR SUITABILITY FOR USE IN AN APPLICATION OF HIS OR HER OWN DESIGN. By the installation of these components, the user or installer assumes all risks of damage, injury or death.
|
|
|
|
|
|
|
|
|
|
Team Z Ballast Bar Weld together Kit- 2" X 2" X 14"
|
|
|
Team Z now offers a kit to build your own ballast bars. Our kits make adding weight to your race car where you need it an ease. Included is a piece of 2" X 2" square tube that is 14" long and can be used at the length or modified for smaller dimensions if need be. We also include 2 styles of end caps to allow you to put your filler on an end or use the filler in a different location. Fabrication and welding is required.
Included in this kit:
1) 2" X 2" X 14" Steel Square Tube
2) Closed end 1/8" End caps
1) Open end 1/8" End Cap
2) 1" Countersunk Bolt Sleeves for Cap Head Bolts
2) 1/2" Trick Tabs
2) 1/2" X 2" Cap Head Bolts
1) Filler and Plug
|
|
|
|
|
|
|
|
|
|
Team Z Ballast Bar Weld together Kit- 2" X 2" X 16"
|
|
|
Team Z now offers a kit to build your own ballast bars. Our
kits make adding weight to your race car where you need it an ease. Included is
a piece of 2" X 2" square tube that is 16" long and can be used
at the length or modified for smaller dimensions if need be. We also include 2
styles of end caps to allow you to put your filler on an end or use the filler
in a different location. Fabrication and welding is required.
Included in this kit:
1) 2" X 2" X 16" Steel Square Tube
2) Closed end 1/8" End caps
1) Open end 1/8" End Cap
2) 1" Countersunk Bolt Sleeves for Cap Head Bolts
2) 1/2" Trick Tabs
2) 1/2" X 2" Cap Head Bolts
1) Filler and Plug
|
|
|
|
|
|
|
|
|
|
Team Z K-Member Shim Kit 1/4"
|
|
|
Team Z now offers a shim kit for all of our 1979-2004 Mustang K-members! Our standard kits comes with (2) front and (2) rear 1/4" thick 6061 aluminum shims, and (4) 14mm X 110mm bolts and (4) 12mm X 30mm bolts to replace your old shorter k-member bolts. We also offer an upgrade to include an extra set of 1/8" plates (2 front and rear) to stack with the 1/4" set to give you 3/8" of spacing between your k-member and frame rails. Our shim kits are cut in house on our waterjet out of 6061 Aluminum to offer great strength without adding extra weight.
*Make sure to use drop down menu to select the extra 1/8" shim add on.
|
|
|
|
