|
|
|
|
|
|
Team Z Strip Series Double Adjustable Upper Control Arm - G-Body
|
|
|
G body double adjustable upper control arms
|
|
|
|
|
|
|
|
|
|
Team Z G Body Double Adjustable Double Heim Lower Control Arms
|
|
|
Double adjustable lower for GM G body cars
|
|
|
|
|
|
|
|
|
|
Team Z G Body Double Adjustable Street Beast Lower Control Arms
|
|
|
G body Street Beast Double Adjustable lower control arm
|
|
|
|
|
|
|
|
|
|
Team Z 1978-1987 G-Body Lower Torque Box Kit - Standard
|
|
|
Team Z offers a lower torque box reinforcement kit to
replace your old worn out or tore up torque boxes on your 1978-1987 G Body. Our kits
offer multiple holes to adjust your suspension geometry, and is tied in to the
frame for extra support. All parts are cut, welded, and assembled in
house!
Made in Michigan.
|
|
|
|
|
|
|
|
|
|
Team Z Universal Anti-Roll Bar G-Body - With Mount Tube
|
|
|
The Team Z Motorsports G-Body Antiroll Bar was designed to be used on 1978-1988 GM G-Body vehicles. Our Antiroll Bars use a 1-1/4" X .250" tube Xtreme Duty bar with 3/16" Arms. Each kit utilizes the included set of Brass Bushings and tabs to mount to the 1-5/8" Chromoly between your frame rails for an easy installation.
Each Kit Includes:
1-24” Center to Center on arm Extreme Duty Style ARB
1-43" Length 1-5/8" Chromoly Tube
2- 3" X 4" .125" Frame Rail Plates 2- Self-lubricating bronze bushings 4- chassis tabs 4- rear end tabs 2- feet of 3/4 .058 wall tube for down links 2- right hand weld in bungs 2- left hand weld in bungs 2- left hand heim joints 2- right hand heim joints Also includes Jam nuts and hardware
|
|
|
|
|
|
|
|
|
|
Team Z Anti-Roll Bar Universal - Weld Together BILLET
|
|
|
Team Z billet anti roll bar kit Features billet steel arms and a 1 1/4” .250 wall main body, self-lubricating bronze bushing. The Team Z Billet anti roll bar kit is a build it yourself universal fit anti roll bar designed for the home builder or job shop that wants to build their own high quality anti roll bar. Kit includes: 2 billet steel arms 30 inches of 1 1/4 inch .250 wall main body Self-lubricating bronze bushings 4 chassis tabs 4 rear end tabs 2 feet of 3/4 .058 wall tube for down links 2 right hand weld in bungs 2 left hand weld in bungs 2 left hand heim joints 2 right hand heim joints Also includes Jam nuts and hardware
|
|
|
|
|
|
|
|
|
|
Team Z G Body Street Beast Rear Upper & Lower Suspension Kit
|
|
|
G body Street Beast rear suspension
|
|
|
|
|
|
|
|
|
|
Team Z G-Body Rear Upper & Lower Suspension Kit
|
|
|
G body rear suspension Kit
|
|
|
|
|
|
|
|
|
|
Team Z Anti-Roll Bar Universal - BILLET
|
|
|
The Team Z billet anti roll bar features billet steel arms and a 1 1/4” .250 wall main body, self-lubricating bronze bushing, and a high quality powder coated finish. The Team Z billet anti roll bar is available in Mustang specific or a universal fit version. Both are designed to eliminate body roll and increase traction and 60-foot times.
This Kit contains:
1- Antiroll Bar (1-1/4" x .250 main body, with Billet Arms)
2- Ends with Bronze Bushings
2- 3/4 Diameter Tubes-16"
2- 3/8 LH Hiems, Weld-In Bungs, and Jam Nuts
2- 3/8 RH Hiems, Weld-In Bungs, and Jam Nuts
4- Weld On Housing Tabs
4- Weld On Tube Tabs
4- 3/8 Bolts
4- 3/8 Nylock Nuts
|
|
|
|
|
|
|
|
|
|
Team Z Anti-Roll Bar Universal Fit Twin Tube with Billet Arms
|
|
|
Bolt in Xtreme duty Anti roll bar
|
|
|
|
|
|
|
|
|
|
Team Z G Body Complete Rear Suspension Kit
|
|
|
G body rear suspension
|
|
|
|
|
|
|
|
|
|
GM brake kit for disc spindles: Regal, S10, El Camino, Malibu, Monte Carlo, Cutlass, Bonneville, Grand Prix, Lemans
|
|
|
Strange front brake kits include Strange 4-piston billet directional calipers, forged slotted steel rotors,scalloped aluminum hubs with Timken bearings, seals, 1/2" screw in studs, soft pads, billet aluminum mounts and all necessary mounting hardware.
Fits the following GM vehicles with factory disc spindles and 4 3/4"bc. 79-87 Regal, 82-90 S10/S15 2wd, 79-87 El Camino, 79-87 Malibu, 79-88 Monte Carlo,79-88 Cutlass, 82-86 Bonneville, 79-87 Grand Prix, 79-81 Lemans.
|
|
|
|
|
|
|
|
|
|
Strange 9" Ford Housing For GM G-Body Application Includes Mounts, Ends, Fill, Drain, & Vent
|
|
|
Application
Bolt-in housing for GM G-Body
Custom widths available at no additional charge
Center Housing – H1110
Constructed from .141″ mild steel
Heavy duty .282″ thick face plate
Internal gussets provide rigidity and support axle tubes
Slots allow exceptional weld contact of housing to tubes
Fill & Drain plugs – H1116 / H1117D
Facilitate fluid changes
Tubing – H1139
3″ OD .250″ wall mild steel tubing
Vent – H1112B
Prevents build-up of internal pressure
Ensures sealing integrity
GM G-Body Coil Spring Mounts
Includes mounts for upper and lower control arms
Choice of Housing Ends
H1143 / H1137
Professionally welded in Strange manufactured fixtures
|
|
|
|
|
|
|
|
|
|
GM brake kit for disc spindles: Regal, S10, El Camino, Malibu, Monte Carlo, Cutlass, Bonneville, Grand Prix, Lemans
|
|
|
Strange front brake kits include Strange 4-piston billet directional calipers, forged slotted steel rotors,scalloped aluminum hubs with Timken bearings, seals, 1/2" screw in studs, soft pads, billet aluminum mounts and all necessary mounting hardware. This kit has 2 Piece Rotors
Fits the following GM vehicles with factory disc spindles and 4 3/4"bc. 79-87 Regal, 82-90 S10/S15 2wd, 79-87 El Camino, 79-87 Malibu, 79-88 Monte Carlo, 79-88 Cutlass, 82-86 Bonneville, 79-87 Grand Prix, 79-81 Lemans.
|
|
|
|
|
|
|
|
|
|
S60 GM G-Body housing / choice of ends / with mounts
|
|
|
S60 fully welded G-Body bare housing, upper & lower control arm mounts, and choice of housing ends.
|
|
|
|
