Mailing List




You are here: Home > FRONT SUSPENSION > outlaw K member kit
Sort By:
Page of 1
Team Z K-Member Shim Kit 1/4"
Team Z K-Member Shim Kit 1/4"
Our Price: $69.00

Team Z now offers a shim kit for all of our 1979-2004 Mustang K-members! Our standard kits comes with (2) front and (2) rear 1/4" thick 6061 aluminum shims, and (4) 14mm X 110mm bolts and (4) 12mm X 30mm bolts to replace your old shorter k-member bolts. We also offer an upgrade to include an extra set of 1/8" plates (2 front and rear) to stack with the 1/4" set to give you 3/8" of spacing between your k-member and frame rails. Our shim kits are cut in house on our waterjet out of 6061 Aluminum to offer great strength without adding extra weight.


*Make sure to use drop down menu to select the extra 1/8" shim add on.
more info
U-Joint 3/4" Smooth 9/16" - 26 Spline
U-Joint 3/4" Smooth 9/16" - 26 Spline
Our Price: $110.00

Low-Profile Needle Bearing Racing U-Joints

Flaming River has designed and manufactured these chrome moly low-profile, needle-bearing racing U-joints to outlast pin-and-block universal joints in racing applications. They have a reduced diameter for applications where clearance and weight are primary concerns, and they do not require lubrication. Strength rating is 400+ foot lbs. Made in the USA.


Features:
Low-profile Design Allows More Clearance
400+ ft/lb Rating
Up to 35°
Black Oxidized Finish

Quantity: Sold individually
Shaft End 1 (in.)3/4 without splines
Shaft End 2 (in.)9/16 26-spline
Steering Universal Joint
Style: Low-profile
Universal Joint Finish: Black oxide
Universal Joint Material: Chromoly
Manufacturer's Part Number:FR1917
more info
Team Z Mustang K-Member Outlaw Tie Rod Kit
Team Z Mustang K-Member Outlaw Tie Rod Kit
Our Price: $184.00

The Team Z Motorsports Outlaw Tie Rod Kit was designed to be used in conjunction with our Outlaw K-members for 79-04 Mustangs. With the relocation of the steering rack on our K-members being moved forward, it is necessary to have longer steering arms. This is where our kit comes handy. We offer a complete kit to make your own tie rod and steering arms to the length you need. We use chromoly tubing, grade 8 hardware, and high quality heims with teflon race.

This kit contains:
2x 7/8" .058" Chromoly tubing 16" long each

2x 3/8 LH bungs
2x 3/8 RH bungs
2x 3/8 RH hiems and jam nuts
2x 3/8 LH hiems and jam nuts
2x 3/8 x 1 1/2" bolt with nylock nuts
2x 7/16 x 1 1/2 bolt with nylock nuts
2x 3/8 x 1 allen head bolt
2x 7/16 x 1 allen head bolt

more info
Team Z Outlaw K member 79-04
Team Z Outlaw K member 79-04
Our Price: $550.00

Team Z outlaw K member for 79-04 mustangs more info
Team Z Mustang 79-04 2" Drop Outlaw Spindles - K Member Only
Team Z Mustang 79-04 2" Drop Outlaw Spindles - K Member Only
Our Price: $629.00

New from Team Z Motorsports are our Outlaw Style Drop Spindles! These spindles provide a 2" drop while being paired up with Strange, Aerospace Components, or TBM 87-93 brakes that use a standard Mustang V8 Spindle. The spindles were designed to be used in conjunction with a stiletto style rack.  They will not work on a standard rack.  These are a great addition to our Outlaw K-member kit and provide superior geometry.  All parts are cut and TIG welded in our shop.  Made in Detroit! more info
Strange Engineering Stiletto Rack & Pinion Steering Box - Door Car
Strange Engineering Stiletto Rack & Pinion Steering Box - Door Car
Our Price: $649.00

Application - Drag Race Door Cars

Steering Rack & Pinion
22 to 1 ratio
24.5″ tie rod centers
20° horizontal pinion angle
9/16″-26 spline pinion – Same spline as Mustang / Pinto
0° vertical pinion angle as shipped
Pinion angle can be adjusted to 20° or 40° upward
4.25″ total rack travel
11.60″ mounting clamp centers

5.75 lbs

Features

Body
• 6061-T6511 billet aluminum
• Black anodized finish

Rack & Pinion Gear
• 4140 premium alloy steel
• Hardened rack & pinion gear

Clevis Ends
• 6061-T6511 billet aluminum
• Accepts 3/8″ high misalignment rod ends *
• Adjustable clevis angles
• Black anodized finish

Bellows
• High temperature silicone

Mounting Clamp – Pinion Side
• 6061-T6511 billet aluminum
• 7/16″-14 bolt holes on 1.25″ centers
• Black anodized finish

Mounting Clamp – Opposing Side
• 6061-T6511 billet aluminum
• 3/8″-16 bolt holes on 1.380″ centers
• Black anodized finish

* Rod Ends Not Included
Use HXAM-16T (RH threads) & HXAB-16T (LH threads)

more info
1979-2004 Mustang Team Z Outlaw K-Member Kit
1979-2004 Mustang Team Z Outlaw K-Member Kit
Our Price: $2,290.00

79-93 Mustang Light weight race only K member designed for oil pan and Diaper clearance, move's the steering rack in front of the pan. more info