|
|
|
|
|
|
Chromoly Threaded Weld in Bung
|
|
|
Weld in bung for 4 link bars or lower control arms fits 1 3/8 .095 wall tube
|
|
|
|
|
|
|
|
|
|
3/4 X 3/4 Right hand heim joint
|
|
|
Heavy duty 3/4 x3/4 RH heim joint 4130 molly
Replace your worn out heims or weaker heim sold by competitors
|
|
|
|
|
|
|
|
|
|
3/4 X 3/4 Left hand heim joint
|
|
|
3/4 X 3/4 LH heim Joint
|
|
|
|
|
|
|
|
|
|
Team Z Race Pack IQ3 Bezel
|
|
|
Have a Race Pack IQ3 Dash? We have the perfect mounting solution for you! We here at Team Z have created this new bezel to allow for a more mounting options. Made out of 1/8" steel CNC cut on our laser jet this is a perfect fit!
|
|
|
|
|
|
|
|
|
|
Team Z Anti Roll Bar Tab Kit (Tabs / Hardware)
|
|
|
Team Z Motorsports offers a anti roll bar tab kit to replace your old tabs, or for your new build. The tabs are cut in house on our water jet out of 1/8" Mild Steel and have a 3/8" hole. This kit also comes with grade 8 - 3/8" nuts and bolts to mount to the heims on your anti roll bar.
|
|
|
|
|
|
|
|
|
|
Team Z shock mount tabs
|
|
|
3/16" Shock mount Tabs
|
|
|
|
|
|
|
|
|
|
Team Z Tubular Front End / Motor Plate Tabs -79-04
|
|
|
Laser cut tabs to allow an motor plate to be used with the Team Z tubular front end kit. Made in the USA!
|
|
|
|
|
|
|
|
|
|
Team Z Bar Coupler
|
|
|
Team Z now offer weld-in inner diameter tube coupler. Each coupler is CNC lathed and milled for a precise fit. Ideal for roll cages, engine bridges and other tube sections that need to be removed. Bolts included. Price is for one assembly. What's Included One (1) Tube coupler clamps (Two halves) Stainless Steel Hardware
Available for tube sizes: -1 5/8" X .083
-1 1/2" X .065
-1 1/4" X .065
|
|
|
|
|
|
|
|
|
|
Team Z Mustang Firewall Closeout Kit 1979-1993
|
|
|
Team Z now offers a firewall closet and grommet for your 1979-1993 Ford Mustang.
If you're looking to fabricate your own steering column and need to close off your firewall we have you covered. This is also the same kit used in our 1979-1993 Mustang Bolt In Steering Column if you need any replacement parts. Each kit comes with a 20 gauge steal close out panel and grommet kit that mount in the factory location.
|
|
|
|
|
|
|
|
|
|
Team Z Anti Roll Bar End Cups
|
|
|
Team Z offers replacement weld in bearing cups for our Anti Roll Bars. Whether you are replacing your old ones or putting your existing roll bar in another car, we have got you covered.
Our kits have 1/8" Mild Steel plates and oil impregnated self lubricating bushings.
We offer these in two size, our 1" ID for those running one of our tail pipe anti roll bars, and our standard 1-1/4" ID for the Xtreme Duty, Universal, and Bolt In Anti-roll Bars. You must check what style you need in the drop down box to assure you get the proper set.
|
|
|
|
|
|
|
|
|
|
Team Z Removeable Crossmember Flange Kit
|
|
|
Removable crossmember flange kit
|
|
|
|
|
|
|
|
|
|
Team Z Steering Wheel Extender (4", 5", 6")
|
|
|
Team Z Motorsports offers a steering wheel extender to move your steering wheel closer to the driver. It is constructed out of 6061 Aluminum to ensure strength while keeping the weight down. Our extenders will be offered in 4", 5", and 6" options, as well as natural finish or powder coated.
|
|
|
|
|
|
|
|
|
|
Team Z Universal Travel Limiter Kit
|
|
|
Team Z universal front end travel limiter kit
|
|
|
|
|
|
|
|
|
|
Team Z Anti-Roll Bar Link Kit
|
|
|
Team Z offers a replacement link kit for your anti roll bars. Whether you lost your old ones or just simply need a set, we have got you covered! Our kits come use high strength hiems and steel hex turnbuckles with a zinc coating to resist corrosion. They also come with mounting tabs for your housing that are waterjet cut in house out of 1/8" Mild Steel. All the necessary grade 8 nuts and bolts are included in this kit as well! This kit fits all our 79-04 Mustang and Our Universal/G-body Antiroll bar kits we offer.
|
|
|
|
|
|
|
|
|
|
Team Z 1979-2004 Weld Together Rear Upper Shock Cross Bar Kit
|
|
|
Team Z Motorsports offers a "You Weld" shock mount kit to make your own upper shock cross bar in your race car. Our kit includes the necessary items to fabricate and mount your own shock mount between the frame rails in most applications.
Kit Includes:
1- 36" long 1-5/8".083 Chromoly Tubing
4 - 3/16" weld on shock mount tabs
2 - 3" x 4" .125" thick steel frame rail plates
4 - Steel shock spacers
2 - Grade 8, 2-1/12" x 1/2" Bolts, and matching nylock nuts
*****Lower shock mounts are available for add-on, make sure to select yes from the drop down to get lower shock mounts.
|
|
|
|
