|
|
|
|
|
|
Team Z S197 A-Arm Bolt Kit 05-14
|
|
|
Team Z offers replacement bolt kits for 2005-2014 Mustang A-arms. If you have misplaced or your stock hardware has seen plenty of use and is showing signs of aging, we have you covered.
Each kit comes with
2) 14mm Grade 10.9 Bolts
2) 14mm Grande 10.9 Nylocks
4) 9/16" Grade 8 Washers
|
|
|
|
|
|
|
|
|
|
Team Z Race Pack IQ3 Bezel
|
|
|
Have a Race Pack IQ3 Dash? We have the perfect mounting solution for you! We here at Team Z have created this new bezel to allow for a more mounting options. Made out of 1/8" steel CNC cut on our laser jet this is a perfect fit!
|
|
|
|
|
|
|
|
|
|
Team Z 05-14 8.8" Bottom Brace
|
|
|
Looking to add more support to your S197 Mustang with a 8.8"? We now offer a weld on under brace for S197 8.8" housing. Our kit comes with a pre bent and notched tube to weld to the housing, and a gusset brace to add even more support to the housing. This kit helps in limiting the axle tubes to bend or move under load and higher horsepower. Every piece is cut and bent in house. Proudly made in Detroit!
-Does not come powder coated
|
|
|
|
|
|
|
|
|
|
Team Z S197 Bolt on Lower Control Arm Bracket
|
|
|
Team Z Motorsports now offers a revised version of our proven lower control arm brackets that can be found on Ford's Cobra Jet Mustangs. We have revised our hole locations to obtain ever greater performance for the 2005-2014 Mustangs. While the stock location of the lowers is fine for cars that have not been altered or are at the stock height, once the car is lowered the geometry changes on the control arm making traction minimal. And we have taken the guess work out of what needs to be done once you lower the car! With 3 extra holes of adjustment you are sure to get your Mustang hooked up and down the track with ease.
Our brackets are constructed from 3/16" steel with a 3/16" doubler bracket welded on each side of the inside here in house. This provides you with 3/8" (.375") per side of thickness to ensure they will be able to handle your high horsepower applications. Our lower brackets are cut on our waterjet and bent on our CNC Brake to ensure the highest quality. These brackets also allow for stock width control arms to make the swap that much more easy.
Ford chose our original design over numerous competitors because they worked better than the rest. Our new revision has more adjustment and ensures you the best performance possible!
|
|
|
|
|
|
|
|
|
|
Team Z Mustang 05-14 Double Adjustable Panhard Bar - Poly Ends
|
|
|
2005-2014 S197 Mustangs Double Adjustable Pan-hard Bar. Constructed of 1-1/8" 4130 Chromoly tube for extreme durability, Eneregy Suspension Poly Bushings, hardened Jam nuts, 3/4" jack screw and powder coated. This pan-hard bar is a good switch from the factory unit when lowering your Mustang with performance suspension parts. Every piece is hand made in-house and TIG welded. This piece allows for on car adjustment when altering your ride height, which makes tuning an easy task.
|
|
|
|
|
|
|
|
|
|
Team Z S197 Bump Steer Kit 2005-2014 (Stock Rack)
|
|
|
With Team Z's 2005-2014 S197 Mustang Bumpsteer kit you can correct the steering geometry of your lowered mustang.
Each kit comes with
2) 6061 T6 Adjusters
2) 5/8" LH 4130 molly hiem with Kevlar/Nylon race
2) 5/8" LH Jam Nuts
2) Hardened Steel Threaded Pins
2) 5pc Spacer sets
4) Nylock Pin Nuts
|
|
|
|
|
|
|
|
|
|
2005-2014 Mustang Strange Single Adjustable Shocks (ea)
|
|
|
Application
2005-2014 Mustang
Description
Single Adjustable Aluminum Shock
Rear – Sold as each
Soft Settings
For Drag Racing
Allows more downward force applied to the rear tires
Medium Settings
For Performance Street
Enhances handling & cornering characteristics
Stiff Settings
For Road Racing
Provides very aggressive control over body roll
Rotating Knob Clockwise Stiffens Valving
Dimension A
Extended 20.09″ / Compressed 12.88″
Features
• Lightweight aluminum body
• 10 extension settings
• Provides a wide range of control
• Easily accessible external adjustment knob
• Allows quick changes for varying conditions
• Custom valving available upon request
• Ability to be rebuilt or revalved
Includes
– Upper stud with rubber cushions
– Concave washers & lock nut
– Lower polyurethane bushing
– Steel inner sleeve
|
|
|
|
|
|
|
|
|
|
Team Z Upper Control Arm Bracket - 2 Hole 05-14
|
|
|
Upgrade your stock Upper Control Arm Bracket with this Team Z Heavy Duty 4130 Chromoly TIG welded Bracket. This bracket came standard on the Cobra Jet Mustangs and can withstand high horsepower! Revisions to the geometry of the stock Mustang have been made with this piece for better traction. Zinc coating to inhibit corrosion.
|
|
|
|
|
|
|
|
|
|
Team Z 05-14 Mustang Rear Tunnel Brace
|
|
|
Team Z Rear tunnel brace is designed for your 2005-2014 S197 Mustang. Our kit is constructed from 1/4" steel cut on our water jet in-house. It comes standard with a removable driveshaft loop that is also made from the same 1/4" steel. It adds rigidity to the rear of the car while offering additional safety in the event of drive shaft failure. Each piece comes powder coated in a silver hammer tone finish to withstand the elements and give a show qulaity piece.
|
|
|
|
|
|
|
|
|
|
Team Z Upper Control Arm Bracket - Slotted - 05-14
|
|
|
Upgrade your stock Upper Control Arm Bracket with this Team
Z Heavy Duty 4130 Chromoly Incrementally Adjustable Upper Bracket. The original design of this bracket with only 2 holes came standard on the Cobra Jet Mustangs, we have since made some design changes to allow for maximum adjustment! Our 2 piece per side serrated brackets and pucks allow for .100" adjustments per tooth, combined with an adjustable upper control arm, you can really dial in your Mustangs geometry and Instant Center. It is
TIG welded and comes standard powdercoated silver hammertone finish. |
|
|
|
|
|
|
|
|
|
Team Z 05-14 Street Beast Double Adjustable UCA
|
|
|
Upgrade from your factory upper control arm to the Team Z Double Adjustable Upper Control arm! These control arms are the same part used on the Ford Cobra Jet Drag Mustangs and are available for any 2005-2014 Mustang. Gain the adjust-ability to set your pinion angle and dial in your suspension with this arm. Chromoly Construction, Energy Suspension Bushing, powder-coated black for durability
|
|
|
|
|
|
|
|
|
|
Team Z 05-14 Radiator Support (Tabs Welded)
|
|
|
Tubular radiator support for 2005-2014 Ford Mustang ( Eliminates front sway bar and mounts)
|
|
|
|
|
|
|
|
|
|
Team Z 05-14 XD Double Adjustable Upper Control Arm
|
|
|
Team Z Motorsports has taken the race proven design of our S197 Double Adjustable Upper and made an Extreme Duty version to handle any power you can throw at it with your 3-link stock suspension 2005-2014 S197 Mustang!
Our Extreme Duty Upper was designed to handle the highest of horsepower and reduce flex and wheel hop allowing you to transfer even more power to the ground than ever before. They can also be rebuilt for years of usage. Constructed from Chromoly and 8620 and CNC machined in house to provide quality to match the performance. Inside the body mounted side, we have made a 8620 sleeve that is encapsulated between two COM12 bearings to spread the force and transfer more power. These uppers in conjunction with both styles of Upper Body Mount brackets offer the most extreme performance, both on the street and the strip!
Each kit comes with (1) Extreme Duty S197 Double Adjustable Upper
|
|
|
|
|
|
|
|
|
|
Team Z Mustang 05-14 Double Adjustable Panhard Bar - Hiem Ends
|
|
|
4130 chromoly adjustable pan hard bar with rod ends.
|
|
|
|
|
|
|
|
|
|
Team Z Mustang 2005-2014 (S197) Double Adjustable Street Beast Lower Control Arms
|
|
|
2005 and up Mustang lower control arm
|
|
|
|
