|
|
|
|
 |
Steering Wheel Cap/Horn Button
|
|

Team Z Motorsports offers a Steering Wheel Center Cap to be used with our Lightweight Steering Wheels and Strange Engineering Q1200NB Hubs. Each center is anodized black with a white “Team Z” logo etched in the surface finish. A great addition to dress up your steering wheel.
|
|
 |
|
|
|
|
 |
Team Z Beanie
|
|

Team Z Motorsports now offers Beanies! Whether its at the track or out on the town, these beanies let you rep the company you know and trust.
|
|
 |
|
|
|
|
 |
Team Z Motorsports Freedom T-shirt
|
|

Because their is nothing more American than Gasoline, Burnouts, And Freedom.
|
|
 |
|
|
|
|
 |
Team Z Flex Fit Hat
|
|

Team Z Motorsports now offers Flex Fit hats! Whether its at the track or out on the town, these hats let you rep the company you know and trust.
|
|
 |
|
|
|
|
 |
Team Z Tubular Front End / Motor Plate Tabs -79-04
|
|

Laser cut tabs to allow an motor plate to be used with the Team Z tubular front end kit. Made in the USA!
|
|
 |
|
|
|
|
 |
Team Z Motorsports Freedom Hoodie
|
|

Because their is nothing more American than Gasoline, Burnouts, And Freedom.
|
|
 |
|
|
|
|
 |
Team Z Banner
|
|

|
|
 |
|
|
|
|
 |
Team Z Mustang Firewall Closeout Kit 1979-1993
|
|

Team Z now offers a firewall closet and grommet for your 1979-1993 Ford Mustang. If you're looking to fabricate your own steering column and need to close off your firewall we have you covered. This is also the same kit used in our 1979-1993 Mustang Bolt In Steering Column if you need any replacement parts. Each kit comes with a 20 gauge steal close out panel and grommet kit that mount in the factory location.
|
|
 |
|
|
|
|
 |
Team Z 1979-2004 Mustang Seat Mount Base
|
|

Team Z Motorsports offers a bolt in Mustang seat mount kit for your 1979-2004 Ford Mustang. Our mounts bolt to the stock floor pans which makes the installation of a lightweight racing seat simple. These brackets are made in house at our facility out of .190" Aluminum to reduce weight while offering higher strength. Hardware is not included with base, stock hardware can be re-used. We also have the Kirkey style side seat brackets in both standard and low profile heights that work in conjunction with these base mounts. Due to varying build tolerances of the Mustang, some fab work may be necessary.
TEAM Z MOTORSPORTS INC. manufactured and/or distributed the enclosed components for use on vehicles designed and built by persons not associated or controlled by KIRKEY RACING FABRICATION INC. No specific use is recommended, intended or contemplated. Because some environments may subject components to severe stress, and because components are affected by many forces beyond the foreseeability and control of TEAM Z MOTORSPORTS INC., these products are sold WITHOUT WARRANTY EXPRESSED OF MERCHANTABILITY OR OF FITNESS FOR ANY PURPOSE. NO WARRANTY EXPRESSED OR IMPLIED ACCOMPANIES THESE PRODUCTS AND THE PURCHASER AND/OR USER, HAVING INSPECTED THESE COMPONENTS, MAKES THE SOLE DETERMINATION OF THEIR SUITABILITY FOR USE IN AN APPLICATION OF HIS OR HER OWN DESIGN. By the installation of these components, the user or installer assumes all risks of damage, injury or death.
|
|
 |
|
|
|
|
 |
Team Z Ballast Bar Weld together Kit- 2" X 2" X 14"
|
|

Team Z now offers a kit to build your own ballast bars. Our kits make adding weight to your race car where you need it an ease. Included is a piece of 2" X 2" square tube that is 14" long and can be used at the length or modified for smaller dimensions if need be. We also include 2 styles of end caps to allow you to put your filler on an end or use the filler in a different location. Fabrication and welding is required.
Included in this kit: 1) 2" X 2" X 14" Steel Square Tube 2) Closed end 1/8" End caps 1) Open end 1/8" End Cap 2) 1" Countersunk Bolt Sleeves for Cap Head Bolts 2) 1/2" Trick Tabs 2) 1/2" X 2" Cap Head Bolts 1) Filler and Plug
|
|
 |
|
|
|
|
 |
Team Z Ballast Bar Weld together Kit- 2" X 2" X 16"
|
|

Team Z now offers a kit to build your own ballast bars. Our
kits make adding weight to your race car where you need it an ease. Included is
a piece of 2" X 2" square tube that is 16" long and can be used
at the length or modified for smaller dimensions if need be. We also include 2
styles of end caps to allow you to put your filler on an end or use the filler
in a different location. Fabrication and welding is required.
Included in this kit:
1) 2" X 2" X 16" Steel Square Tube
2) Closed end 1/8" End caps
1) Open end 1/8" End Cap
2) 1" Countersunk Bolt Sleeves for Cap Head Bolts
2) 1/2" Trick Tabs
2) 1/2" X 2" Cap Head Bolts
1) Filler and Plug
|
|
 |
|
|
|
|
 |
Team Z K-Member Shim Kit 1/4"
|
|

Team Z now offers a shim kit for all of our 1979-2004 Mustang K-members! Our standard kits comes with (2) front and (2) rear 1/4" thick 6061 aluminum shims, and (4) 14mm X 110mm bolts and (4) 12mm X 30mm bolts to replace your old shorter k-member bolts. We also offer an upgrade to include an extra set of 1/8" plates (2 front and rear) to stack with the 1/4" set to give you 3/8" of spacing between your k-member and frame rails. Our shim kits are cut in house on our waterjet out of 6061 Aluminum to offer great strength without adding extra weight.
*Make sure to use drop down menu to select the extra 1/8" shim add on.
|
|
 |
|
|
|
|
 |
Team Z 1979-2004 Mustang Standard Height Seat Mount Bracket
|
|

Team Z now offers a Standard Height Seat Mount for aftermarket
Kirkey style aluminum racing seats. Our seat mount brackets are made in house
on our waterjet from .190" thick aluminum and bent on our CNC brake. With
multiple mounting holes, our brackets offer great adjustment both for height
and lay back. It makes mounting your aftermarket seat simple. Hardware not included.
These brackets mount to the side of most any aftermarket racing seats,
fabrication is necessary. Can be used with our seat mount bases, or you can
make your own frame mounts.
TEAM Z MOTORSPORTS INC. manufactured and/or distributed the enclosed components
for use on vehicles designed and built by persons not associated or controlled
by KIRKEY RACING FABRICATION INC. No specific use is recommended, intended or
contemplated. Because some environments may subject components to severe
stress, and because components are affected by many forces beyond the
foreseeability and control of TEAM Z MOTORSPORTS INC., these products are sold
WITHOUT WARRANTY EXPRESSED OF MERCHANTABILITY OR OF FITNESS FOR ANY PURPOSE. NO
WARRANTY EXPRESSED OR IMPLIED ACCOMPANIES THESE PRODUCTS AND THE PURCHASER
AND/OR USER, HAVING INSPECTED THESE COMPONENTS, MAKES THE SOLE DETERMINATION OF
THEIR SUITABILITY FOR USE IN AN APPLICATION OF HIS OR HER OWN DESIGN. By the
installation of these components, the user or installer assumes all risks of
damage, injury or death.
|
|
 |
|
|
|
|
 |
Team Z 1979-2004 Mustang Low Profile Seat Mount Bracket
|
|

Team Z offers a Low Profile Seat Mount for aftermarket Kirkey style aluminum racing seats. Our seat mount brackets are made in house on our water jet from .190" thick aluminum and bent on our CNC brake. These brackets allow you to mount your seats much lower than most other standard style mount. With multiple mounting holes, our brackets offer great adjustment both for height and lay back. It makes mounting your aftermarket seat simple. Hardware not included.
These brackets mount to the side of most any aftermarket racing seats, fabrication is necessary. Can be used with our seat mount bases, or you can make your own frame mounts.
TEAM Z MOTORSPORTS INC. manufactured and/or distributed the
enclosed components for use on vehicles designed and built by persons not
associated or controlled by KIRKEY RACING FABRICATION INC. No specific use is
recommended, intended or contemplated. Because some environments may subject
components to severe stress, and because components are affected by many forces
beyond the foreseeability and control of TEAM Z MOTORSPORTS INC., these
products are sold WITHOUT WARRANTY EXPRESSED OF MERCHANTABILITY OR OF FITNESS
FOR ANY PURPOSE. NO WARRANTY EXPRESSED OR IMPLIED ACCOMPANIES THESE PRODUCTS
AND THE PURCHASER AND/OR USER, HAVING INSPECTED THESE COMPONENTS, MAKES THE
SOLE DETERMINATION OF THEIR SUITABILITY FOR USE IN AN APPLICATION OF HIS OR HER
OWN DESIGN. By the installation of these components, the user or installer
assumes all risks of damage, injury or death.
|
|
 |
|
|
|
|
 |
Team Z Billet Aluminum Lug Nut (Solid Gold) - 1/2"
|
Our Price: $116.00 Current Price: $80.00 You save $36.00!
|
|
|

Team Z Billet Aluminum Lug Nuts for 1/2" - 20 thread
Machined from 7075 T6 Aluminum
Uses a 3/4" SAE 12 point socket
Price is per set of 10
Available in Solid Gold for one low price.
*** NOT FOR STREET USE****
|
|
 |