Mailing List




You are here: Home > BUILDER KITS > Brackets and Tabs
Sort By:
Page of 2
Team Z shock mount tabs
Team Z shock mount tabs
Our Price: $25.00

3/16" Shock mount Tabs
Weld Together LS Mounts for Team Z LS Mustang K-Member
Weld Together LS Mounts for Team Z LS Mustang K-Member
Our Price: $40.00

Team Z now offers weld together LS motor mounts for our LS -K-member swap kits.  Our kits allow you to put the engine in your own desired location to fit what engine combination you have.  Our mounts are cut here in house on our CNC Waterjet out of 3/16" thick steel.  Each kit comes with two bolt on engine mounts to mount on the side of the block, and 4 tabs to weld to the bolt on mounts in your desired location.
Team Z removeable crossmember flange kit
Team Z removeable crossmember flange kit
Our Price: $52.00

Removable crossmember flange kit
Team Z universal travel limiter kit
Team Z universal travel limiter kit
Our Price: $65.00

Team Z universal front end travel limiter kit
Team Z Anti Roll Bar Link Kit
Team Z Anti Roll Bar Link Kit
Our Price: $68.00

Team Z offers a replacement link kit for your anti roll bars.  Whether you lost your old ones or just simply need a set, we have got you covered! Our kits come use high strength hiems and steel hex turnbuckles with a zinc coating to resist corrosion. They also come with mounting tabs for your housing that are waterjet cut in house out of 1/8" Mild Steel.  All the necessary grade 8 nuts and bolts are included in this kit as well!  This kit fits all our 79-04  Mustang and Our Universal/G-body Antiroll bar kits we offer.
Team Z Aluminum Mustang Dzus Rail Kit
Team Z Aluminum Mustang Dzus Rail Kit
Our Price: $85.00

Team Z Motorsports now offers aluminum dzus rail kits for your 79-93, 94-2004, and 2005-2014 Mustangs. Our kits are made from .065 aluminum, cut in house on our water jet to ensure quality, and come standard with mounting rivets.

We offer an additional kit to include all the neccessary springs and allen head or conventional style dzus fasteners. Make sure you select your year and choose to upgrade to the complete kit.
Lower Shock bracket for 8.8 Housing
Lower Shock bracket for 8.8 Housing
Our Price: $89.00

8.8 housing lower shock bracket for coil over shocks
Team Z 8.8 lower control arm Bracket
Team Z 8.8 lower control arm Bracket
List Price: $139.99
Our Price: $109.99
Current Price: $109.99
You save $30.00!

8.8 lower control arm brackets
Team Z Small Block Chevy Motor Plate Blank
Team Z Small Block Chevy Motor Plate Blank
Our Price: $126.00

We now offer a Blank Motor Plate for your Small Block Chevy to allow you to custom fit the motor plate to any frame rail or accessories that you may need to mount.  Just simply make your patterns on our 1/4" thick 6061 Aluminum motor plate and cut out what you need.  It comes with the 3/16" mounting plates and tabs and grade 8 hardware to bolt it up.  Made in house on our waterjet in Detroit!
Team Z Big Block Chevy Motor Plate Blank
Team Z Big Block Chevy Motor Plate Blank
Our Price: $126.00

We now offer a Blank Motor Plate for your Big Clock Chevy to allow you to custom fit the motor plate to any frame rail or accessories that you may need to mount.  Just simply make your patterns on our 1/4" thick 6061 Aluminum motor plate and cut out what you need.  It comes with the 3/16" mounting plates and tabs and grade 8 hardware to bolt it up.  Made in house on our waterjet in Detroit!
Team Z 8.8" Forward Brace
Team Z 8.8" Forward Brace
Our Price: $135.00

Want to add some support to your 8.8" Housing?  We now offer a front brace to add support from your pinion!  Our kit comes weld on tabs that mount to your axle tubes between the control arm brackets, a set of adjustable support bars and hiems, and all the hardware to mount this kit.  You must drill out the holes close to the pinion to 7/16" to fit the bolts to these supports.
Team Z 8.8" Bottom Brace
Team Z 8.8" Bottom Brace
Our Price: $135.00

Looking to add more support to your 8.8"?  In addition to our forward brace, we offer a weld on under brace for 8.8" housing.  Our kit comes with a pre bent and notched tube to weld to the housing, and a gusset brace to add even more support to the housing.  This kit helps in limiting the axle tubes to bend or move under load and higher horsepower.  Every piece is cut and bent in house.
79-04 Mustang Upper Shock Cross Bar
79-04 Mustang Upper Shock Cross Bar
Our Price: $168.00

This bar allows you to hang coil over shocks in board of your factory mounts with ease!  It slides up between your frame rails and gets welded in to place.  Constructed out of 1-5/8" Chromoly tubing and made in house in Michigan.

Comes with Bar, (2) 1/2 x 2-1/2" Bolts, (2) 1/2" Nylock Nuts, and (4) Shock Spacers.
Team Z Mustang Outlaw K-member Tie Rod Kit
Team Z Mustang Outlaw K-member Tie Rod Kit
Our Price: $175.00

The Team Z Motorsports Outlaw Tie Rod Kit was designed to be used in conjunction with our Outlaw K-members for 79-04 Mustangs. With the relocation of the steering rack on our K-members being moved forward, it is necessary to have longer steering arms. This is where our kit comes handy. We offer a complete kit to make your own tie rod and steering arms to the length you need. We use chromoly tubing, grade 8 hardware, and high quality heims with teflon race.

This kit contains:
2x 7/8" .058" Chromoly tubing 16" long each

2x 3/8 LH bungs
2x 3/8 RH bungs
2x 3/8 RH hiems and jam nuts
2x 3/8 LH hiems and jam nuts
2x 3/8 x 1 1/2" bolt with nylock nuts
2x 7/16 x 1 1/2 bolt with nylock nuts
2x 3/8 x 1 allen head bolt
2x 7/16 x 1 allen head bolt

Big Block Chevy Mustang Motorplate
Big Block Chevy Mustang Motorplate
Our Price: $177.00

Front Motor plate for 1979-2004 Ford Mustang with a Big Block Chevy based engine. Made from 6061 Aluminum . Comes with factory 3/4"  offset Laser cut weld in mounting tabs and hardware.




Features
Aluminum construction
Weld in mounting tabs
Grade 8 hardware