Mailing List




You are here: Home > BUILDER KITS
Sort By:
Page of 2
Team Z - 3/16" Wing Quickpin
Our Price: $3.00

Team Z offers replacement 3/16" quickpins for our outlaw style wings.
Team Z 10/32 Wing Tube Adapter
Our Price: $6.00

Team Z now offers 10/32 weld in tube adapters for those looking to replace the adapters on our support rod kits, or those looking to build their own support rods. These adapters fit in 3/8" X .058" tube.  Price is per 1, use drop down menu to select the quantity you want!
Team Z Replacement Wing Hiem
Our Price: $6.50

10/32 Right-Hand replacement rod end for Team Z Motorsports Outlaw style wings. Price is per 1 individual hiem.
Team Z 1/2" Trick Tab Kit
Our Price: $11.75

This kit includes 6) .125" thick trick tabs with 1/2" (.500") holes for mounting various parts to your chassis.
Team Z Replacement Strut Plate
Our Price: $12.00

Team Z offers a replacement or build your own support rod strut mount plate.  These can be mounted to your vehicle to fasten a strut to your wing.  Constructed out of stainless steel here in house. Price is per 1, use drop down menu to select more
Team Z Weld On Filler Cap
Our Price: $19.95

Team Z Motorsports offers a weld on filler cap for your fabrication needs. Whether you are building your own housing, or making a set of ballast bars, we have you covered. The filler neck and cap are made in house on our CNC Lathe to ensure a high standard of quality while being affordable. The filler necks are turned down from 8620 steel and the caps from 6061 Aluminum to provide high strength.
Welding rod for cage kits
Our Price: $26.00

you want your welds to look like ours, use the welding rod we do!
Team Z Wing Support Rod Replacement Kit
Our Price: $26.00

Team Z now offers replacement support rods for all of our outlaw style wings. Each kit comes with a male and female support rod to adjust the pitch of your wing.
Team Z Weld Together Steering Wheel Extender
Our Price: $28.99

Team Z now offers a weld together version of our steering wheel extender kit.  Each kit comes with 2) 6061 Aluminum hub mounts and 1) 8" of 6061 Tube.
Team Z Bar Coupler
Our Price: $37.99

Team Z now offer weld-in inner diameter tube coupler. Each coupler is CNC lathed and milled for a precise fit. Ideal for roll cages, engine bridges and other tube sections that need to be removed. Bolts included. Price is for one assembly.
What's Included
One (1) Tube coupler clamps (Two halves)
Stainless Steel Hardware

Available for tube sizes:
-1 5/8" X .083
-1 1/2" X .065
-
1 1/4" X .065

Team Z - 2" X 2" X 14" Weld Together Ballast Bar
Our Price: $59.99

Team Z now offers a kit to build your own ballast bars. Our kits make adding weight to your race car where you need it an ease. Included is a piece of 2" X 2" square tube that is 14" long and can be used at the length or modified for smaller dimensions if need be. We also include 2 styles of end caps to allow you to put your filler on an end or use the filler in a different location. Fabrication and welding is required.

Included in this kit:
1) 2" X 2" X 14" Steel Square Tube
2) Closed end 1/8" End caps
1) Open end 1/8" End Cap
2) 1" Countersunk Bolt Sleeves for Cap Head Bolts
2) 1/2" Trick Tabs
2) 1/2" X 2" Cap Head Bolts
1) Filler and Plug
Team Z 79-04 Mustang Seat Mount Base
Our Price: $60.00

Team Z Motorsports now offers a bolt in Mustang seat mount kit for your 1979-2004 Ford Mustang. Our mounts bolt directly to the stock floor pans which makes the installation of a lightweight racing seat simple. These brackets are made in house at our facility out of .190" Aluminum to reduce weight while offering higher strength. Hardware is not included with base, stock hardware can be re-used.

Also, check out our Kirkey style side seat mounts in both standard and low profile heights that work in conjunction with these base mounts.

Due to varying build tolerances of the Mustang, some fab work may be necessary.






TEAM Z MOTORSPORTS INC. manufactured and/or distributed the enclosed components for use on vehicles designed and built by persons not associated or controlled by KIRKEY RACING FABRICATION INC. No specific use is recommended, intended or contemplated. Because some environments may subject components to severe stress, and because components are affected by many forces beyond the foreseeability and control of TEAM Z MOTORSPORTS INC., these products are sold WITHOUT WARRANTY EXPRESSED OF MERCHANTABILITY OR OF FITNESS FOR ANY PURPOSE. NO WARRANTY EXPRESSED OR IMPLIED ACCOMPANIES THESE PRODUCTS AND THE PURCHASER AND/OR USER, HAVING INSPECTED THESE COMPONENTS, MAKES THE SOLE DETERMINATION OF THEIR SUITABILITY FOR USE IN AN APPLICATION OF HIS OR HER OWN DESIGN. By the installation of these components, the user or installer assumes all risks of damage, injury or death.
Team Z - 2" X 2" X 16" Weld Together Ballast Bar
Our Price: $60.99

Team Z now offers a kit to build your own ballast bars. Our kits make adding weight to your race car where you need it an ease. Included is a piece of 2" X 2" square tube that is 16" long and can be used at the length or modified for smaller dimensions if need be. We also include 2 styles of end caps to allow you to put your filler on an end or use the filler in a different location. Fabrication and welding is required.

Included in this kit:
1) 2" X 2" X 16" Steel Square Tube
2) Closed end 1/8" End caps
1) Open end 1/8" End Cap
2) 1" Countersunk Bolt Sleeves for Cap Head Bolts
2) 1/2" Trick Tabs
2) 1/2" X 2" Cap Head Bolts
1) Filler and Plug

Team Z Low Profile Seat Mount Bracket
Our Price: $65.00

Team Z now offers a Low Profile Seat Mount for aftermarket Kirkey style aluminum racing seats. Our seat mount brackets are made in house on our waterjet from .190" thick aluminum and bent on our CNC brake. These brackets allow you to mount your seats much lower than most other standard style mount. With multiple mounting holes, our brackets offer great adjustment both for height and lay back. It makes mounting your aftermarket seat simple. Hardware not included.

These brackets mount to the side of most any aftermarket racing seats, fabrication is necessary. Can be used with our seat mount bases, or you can make your own frame mounts.









TEAM Z MOTORSPORTS INC. manufactured and/or distributed the enclosed components for use on vehicles designed and built by persons not associated or controlled by KIRKEY RACING FABRICATION INC. No specific use is recommended, intended or contemplated. Because some environments may subject components to severe stress, and because components are affected by many forces beyond the foreseeability and control of TEAM Z MOTORSPORTS INC., these products are sold WITHOUT WARRANTY EXPRESSED OF MERCHANTABILITY OR OF FITNESS FOR ANY PURPOSE. NO WARRANTY EXPRESSED OR IMPLIED ACCOMPANIES THESE PRODUCTS AND THE PURCHASER AND/OR USER, HAVING INSPECTED THESE COMPONENTS, MAKES THE SOLE DETERMINATION OF THEIR SUITABILITY FOR USE IN AN APPLICATION OF HIS OR HER OWN DESIGN. By the installation of these components, the user or installer assumes all risks of damage, injury or death.

Team Z Standard Height Seat Mount Bracket
Our Price: $65.00

Team Z now offers a Standard Height Seat Mount for aftermarket Kirkey style aluminum racing seats. Our seat mount brackets are made in house on our waterjet from .190" thick aluminum and bent on our CNC brake. With multiple mounting holes, our brackets offer great adjustment both for height and lay back. It makes mounting your aftermarket seat simple. Hardware not included.

These brackets mount to the side of most any aftermarket racing seats, fabrication is necessary. Can be used with our seat mount bases, or you can make your own frame mounts.









TEAM Z MOTORSPORTS INC. manufactured and/or distributed the enclosed components for use on vehicles designed and built by persons not associated or controlled by KIRKEY RACING FABRICATION INC. No specific use is recommended, intended or contemplated. Because some environments may subject components to severe stress, and because components are affected by many forces beyond the foreseeability and control of TEAM Z MOTORSPORTS INC., these products are sold WITHOUT WARRANTY EXPRESSED OF MERCHANTABILITY OR OF FITNESS FOR ANY PURPOSE. NO WARRANTY EXPRESSED OR IMPLIED ACCOMPANIES THESE PRODUCTS AND THE PURCHASER AND/OR USER, HAVING INSPECTED THESE COMPONENTS, MAKES THE SOLE DETERMINATION OF THEIR SUITABILITY FOR USE IN AN APPLICATION OF HIS OR HER OWN DESIGN. By the installation of these components, the user or installer assumes all risks of damage, injury or death.