Mailing List




You are here: Home > HEADERS
Choose a sub category:
Ford Headers Chevy Headers
COLLECTORS
Sort By:
Page of 2
Stainless Works Race Muffler 3.5" OD
Stainless Works Race Muffler 3.5" OD
Our Price: $132.00

The Stainless Works muffler is a great solution to stay legal in a race class that mandates mufflers. Made from 304 stainless steel and featuring a perforated interior core, our race mufflers weigh a mere 1/2 pound each. Includes a 5-year limited warranty.


This race muffler has a 3.5" OD inlet and outlet, with 4.25" diameter round body and a 5" overall length. Price is per muffler.


Features:
‣ 304 stainless steel construction
‣ weight saving at 1/2 pound each
‣ 5-year limited warranty


Dimensions:
‣ 3.5" OD inlet and outlet
‣ 4.25" diameter body
‣ 5" overall length

more info
Stainless Works Race Muffler 4.5" OD
Stainless Works Race Muffler 4.5" OD
Our Price: $164.00

The Stainless Works race muffler is a great solution to stay legal in a race class that mandates mufflers. Made from 304 stainless steel and featuring a perforated interior core, our race mufflers weigh a mere 1/2 pound each. Includes a 5-year limited warranty.


This race muffler has a 4.5" OD inlet and outlet, with 5.125" diameter round body and a 5" overall length. Price is per muffler.


Features:
‣ 304 stainless steel construction
‣ weight saving at 1/2 pound each
‣ 5-year limited warranty


Dimensions:
‣ 4.5" OD inlet and outlet
‣ 5.125" diameter body
‣ 5" overall length

more info
Stainless Works Race Muffler 5" OD
Stainless Works Race Muffler 5" OD
Our Price: $175.00

The Stainless Works race muffler is a great solution to stay legal in a race class that mandates mufflers. Made from 304 stainless steel and featuring a perforated interior core, our race mufflers weigh a mere 1/2 pound each. Includes a 5-year limited warranty.

This race muffler has a 5" OD inlet and outlet, with 5.75" diameter round body and a 5" overall length. Price is per muffler.


Features:
‣ 304 stainless steel construction
‣ weight saving at 1/2 pound each
‣ 5-year limited warranty


Dimensions:
‣ 5" OD inlet and outlet
‣ 5.75" diameter body
‣ 5" overall length

more info
Stainless Works  Catalytic Converter - Metal Matrix Hi-Flow
Stainless Works Catalytic Converter - Metal Matrix Hi-Flow
Our Price: $226.00

Hi-Flow Metal Matrix 200 cell Catalytic Converter. 10-3/4" overall length with 4" Body dia., 3" ID inlet and 3" OD outlet. These are the highest flowing, most durable cats on the market. These cats are recommended for high horsepower, nitrous, supercharged and turbo charged applications. more info
COLLECTOR MERGE STYLE 2.250 INCH INLET 4.00 INCH OUTLET MILD STEEL DYNATECH
COLLECTOR MERGE STYLE 2.250 INCH INLET 4.00 INCH OUTLET MILD STEEL DYNATECH
Our Price: $229.99

Dynatech Merge Collectors are an excellent way to maximize the potential of your exhaust system. When your exhaust system requires the maximum horsepower, a set of Dynatech Merge Collectors are the ticket. Designed with a 15 degree merge angle and comes with a High-temp black painted finish. In order to realize the full potential of a merge collector, dyno testing is recommended.

MFG. Part #: 780-02518 Overall Length: 12.00 Tube O.D.: 2.38 Collector Length: 10.00 Collector Diameter: 4.00 Material Thickness: .060 Material Type: Steel Finish: Painted Hardware Included: Yes Sold in Quantity: Each
more info
COLLECTOR MERGE STYLE 2.50 INCH INLET 4.50 INCH OUTLET MILD STEEL DYNATECH
COLLECTOR MERGE STYLE 2.50 INCH INLET 4.50 INCH OUTLET MILD STEEL DYNATECH
Our Price: $229.99

Dynatech Merge Collectors are an excellent way to maximize the potential of your exhaust system. When your exhaust system requires the maximum horsepower, a set of Dynatech Merge Collectors are the ticket. Designed with a 15 degree merge angle and comes with a High-temp black painted finish. In order to realize the full potential of a merge collector, dyno testing is recommended. more info
CATTED SECTION 2005-2010 4.6L MUSTANG GT 2.50 INCH STAINLESS STEEL DYNATECH
CATTED SECTION 2005-2010 4.6L MUSTANG GT 2.50 INCH STAINLESS STEEL DYNATECH
Our Price: $649.99

Dynatech's 2.5" Catted X Pipe features high flow cats that is sure to boost horsepower and torque while keeping you street legal. Dynatechs fit and finish is second to none, we're absolutely sure you'll love it. 722-54320




Product Information
Dynatech not only manufacturers high quality headers, but their X pipe systems are the perfect complement to a new set of headers. This 2.5" intermediate pipe features high flow cats that will boost horsepower and torque while allowing you to stay emissions legal!

Dynatech is a premium name in the Mustang exhaust aftermarket scene. They utilize all stainless steel construction which means you don't have to worry about your exhaust rusting out on you in a few years. The fit and finish of a Dynatech system is second to none. Easily bolt on this catted mid pipe along with their long tube headers (found to the right of this page) for an easy 30+ horsepower increase.

Key Specs
2.5" mandrel bent tubing
Features high flow cats
Fits all 2005-2010 GT & GT500 Mustangs with long tube headers installed.
more info
HEADER MUSCLECAR 1967-1969 BBC TALL DECK CAMARO 2.125 INCH MILD STEEL DYNATECH
HEADER MUSCLECAR 1967-1969 BBC TALL DECK CAMARO 2.125 INCH MILD STEEL DYNATECH
Our Price: $699.99

These Long Tube Big Block Chevy Headers for 67-69 Camaro and 68-74 Nova are designed for use with a 572 Tall Deck Engine using cylinder heads that use the factory Big Block Chevy bolt pattern. The 2-1/8” Long Tube design promotes excellent torque throughout the RPM range. These are built for use with the factory subframe. The 3.50” collectors are welded on for a great leak free seal and an easy connection to your exhaust system if you choose to do so. Comes complete with reducer cones and stainless band clamps to adapt the 3.50” collectors down to 3.00” for exhaust connection. Finished in a High-Temp Black painted finish and optional ceramic coating inside and out for a long lasting durable appearance. 16 gauge steel construction and CNC last cut, surfaced flanges make this a durable header that remains leak free for multiple racing seasons. Comes standard with a Full One Year Warranty. Eligible for the Nationwide Dynatech “You Win We Pay” Contingency Program. more info
79-04 Mustang Hdr w/Tubular K-Member for BBC
79-04 Mustang Hdr w/Tubular K-Member for BBC
Our Price: $699.99

79-04 Mustang Hdr w/Tubular K-Member for BBC 2-1/8" w 3.50" coll
•2-1/8" Primary Tube design with 3.50" Coll. •Designed to clear factory starter, steering shaft, master cyl., booster,etc. •Available with standard High Temp Black finish. •Designed to be a "Direct Bolt In" when using a Team Z K-member •Must use tubular lower control arms •When using in a Fox Body, Driver's Side transmission cross member mount may require trimming.
more info
CATTED SECTION 2011-2013 5.0 & 5.4L MUSTANG & GT500 3.00 INCH STAINLESS STEEL DYNATECH
CATTED SECTION 2011-2013 5.0 & 5.4L MUSTANG & GT500 3.00 INCH STAINLESS STEEL DYNATECH
Our Price: $749.99

Dynatech's 3" Catted X Pipe is the perfect addition to your Mustang, especially if you have their headers. They feature high flow catalytic converters that let those exhaust gases flow and keep you street legal. 722-74320.




Product Information
Dynatech not only manufacturers high quality headers, but their X pipe systems are the perfect complement to a new set of headers. This huge, 3" X pipe is intended for high horsepower vehicles that need the utmost in exhaust flow. The pre-welded high flow cats will boost power while allowing you to pass emissions!

Dynatech is a premium name in the Mustang exhaust aftermarket scene. They utilize all stainless steel construction which means you don't have to worry about your exhaust rusting out on you in a few years. The fit and finish of a Dynatech system is second to none. Easily bolt on this catted mid pipe along with their long tube headers (found to the right of this page) for an easy 30+ horsepower increase.

Key Specs
3" mandrel bent tubing
Features high flow cats
Fits all 2011-2014 GT Mustangs with long tube headers installed.
more info
HEADER 2005-2010 4.6L MUSTANG GT 1.75 INCH STAINLESS STEEL DYNATECH
HEADER 2005-2010 4.6L MUSTANG GT 1.75 INCH STAINLESS STEEL DYNATECH
Our Price: $899.99

Dynatech MuscleMAXX headers are now available with a high-temperature silver ceramic coating or high-temperature black paint and come with gaskets and header bolts. These headers use a 3 in. collector with a 4-bolt leak-free flange, as well as ball and socket self-aligning reducer cone. Drag race versions feature a slip-fit connection and include weld-on "U"-style tabs. Increase the horsepower to your vehicle with these Dynatech MuscleMAXX headers. Unless otherwise noted, these headers are custom designed to fit the vehicle as it came from the manufacturer. This product includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is has aftermarket components, parts from other applications, or custom altered parts, then it is the installer's role to verify fitment.




Features
Header Type: Full-length
Material: Stainless steel
Finish: Natural
Tube Diameter (in): 1 3/4 in.
Attachment: Stock flange
Collector Diameter: 3.000 in.
Cylinder Head Port: Round
Flange Thickness (in): 3/8 in.
more info
HEADER DRAG RACE 1967-1969 BBC TALL DECK CAMARO 2.125 INCH CERAMIC COATED DYNATECH
HEADER DRAG RACE 1967-1969 BBC TALL DECK CAMARO 2.125 INCH CERAMIC COATED DYNATECH
Our Price: $899.99

These Long Tube Big Block Chevy Headers for 67-69 Camaro and 68-74 Nova are designed for use with a 572 Tall Deck Engine using cylinder heads that use the factory Big Block Chevy bolt pattern. The 2-1/8" Long Tube design promotes excellent torque throughout the RPM range. These are built for use with the factory subframe. Slip-on style collectors make changing collectors easy and are sold separately so you can choose from Standard or Merge style. (Part numbers: 783-61236, 783-61241 or 780-12517). Ceramic coated inside and out for a long lasting durable appearance. 16 gauge steel construction and CNC last cut, surfaced flanges make this a durable header that remains leak free for multiple racing seasons. Comes standard with a Full One Year Warranty. Eligible for the Nationwide Dynatech “You Win We Pay” Contingency Program. more info
HEADER 2010-2014 6.2 CAMARO 1.875 INCH STAINLESS STEEL DYNATECH
HEADER 2010-2014 6.2 CAMARO 1.875 INCH STAINLESS STEEL DYNATECH
Our Price: $999.99

Dynatech 715-74010 - Dynatech SuperMAXX Stainless Steel Exhaust Systems Details

2010-2014 Chevy Camaro 6.2L

+ 36 Horsepower
+ 25 ft. lbs. of Torque
more info
HEADER 2005-2013 C6/C6 ZO6 LS CORVETTE 1.875 INCH STAINLESS STEEL DYNATECH
HEADER 2005-2013 C6/C6 ZO6 LS CORVETTE 1.875 INCH STAINLESS STEEL DYNATECH
Our Price: $999.99

Dynatech SuperMAXX Headers Chevy Corvette C6/Z06 (05-11) 715-63510

+16 horsepower +16 ft/lbs of torque - 1 7/8" Primary Tubes and 3" Collector - Requires Dynatech Intermediate pipe

Dynatech SuperMAXX stainless steel headers are built for performance!  Designed, hand crafted and built in Indiana, these long tube design headers are carefully CAD engineered to deliver the most power possible and give your car a deep and throaty sound.

Dynatech SuperMAXX Headers feature:

Race inspired long tube header design
CAD-designed Aero-flow collectors
Low profile, 4 bolt leak free connections
Retains full use of factory sensors
Quality stainless steel hardware for long life
NASCAR-style merge collectors on many models
Not CARB legal
Proudly built in the USA
more info
HEADER 2011-2016 5.0 & 5.4L MUSTANG & GT500 1.875 INCH STAINLESS STEEL DYNATECH
HEADER 2011-2016 5.0 & 5.4L MUSTANG & GT500 1.875 INCH STAINLESS STEEL DYNATECH
Our Price: $999.99

Dynatech 1-7/8" Long tube Headers from StangMods 722-74310. Increase your exhaust flow and add crazy amounts of power to your Stang. The all stainless steel construction ensures a long life and amazing looks.




Product Information
Dyantech manufacturer some of the highest quality headers and exhaust components in the business! Their long tube headers for the 11-16 GT feature 1-7/8" primaries with 3" tubing and a massive 3" collector. The all stainless steel construction ensures these will last the life of your vehicle. Long tube headers benefit your Mustang by increasing exhaust flow. You'll notice a tremendous increase in power and torque throughout the RPM range. Bolt on the matching mid pipe and expect a power increase of over 30 horsepower and torque!

Dyantech's SuperMaxx headers feature the best fit, power and performance over any other Mustang header on the market. High quality hardware including new gaskets and full installation instructions are included with every order. Give your Mustang a boost in power and sound with a new set of long tube headers
Key Specs
1-7/8" primaries
3" tubing
3" collector size
All stainless steel finish
3/8" laser cut flanges
4 bolt ball & socket collector flanges
Gaskets and hardware included
Adds 30+ horsepower and torque
Great fitment and sound

Fits 2011-2014 Mustang GT with Dynatech mid pipe
more info